/ How to make an aerodynamic body kit by yourself?

How to make an aerodynamic body kit by yourself?

To create a clamping force acting on thecar, it is necessary to make a weather cloth. With my own hands, of course. In addition to a significant optimization of air flows, your car will have a unique exterior. And in some cases, the external tuning of cars is changing beyond recognition. Relative cheapness and efficiency of using skirts make them a rather popular way of transforming the appearance of cars.

Body weight

To increase the clamping force of the front partThe car is a body kit of the front bumper. Side vortices that are able to squeeze the car off the road while driving, must be eradicated by making a sill of the thresholds. The swirls of the air behind the car are quite dangerous, because they can immediately lead to loss of controllability. Thus, without the manufacture of a rear bumper trim, it is difficult to manage. Especially if you plan to drive at high (120 km / h and above) speeds.

The spoiler can be considered part of the aerodynamicbody kit and be designed to press the back of the car to the road surface. Sometimes body kits do for the decoration of air ducts, which perform the functions of cooling individual parts of the car. For example, a brake, a radiator or an intake manifold.

Before the beginning of manufacture it is necessary to solve, inwhat purpose the body kit will be used for. With your own hands, you can make elements that will improve the aesthetic appearance of the car and change some of its technical qualities. True, the second option involves a more serious change in the body structure.

External car tuning

Suppose that you have decided to makebody kit to change the appearance of the car and give it a more sporting and aggressive look. In this case, you can make the body kit with your own hands, without removing the factory bumpers or thresholds. This will ensure the resulting design of the required level of strength.

If you are inclined to the second option, then youshould be prepared for possible dismantling of some body parts, changing its design by cutting out the holes for air ducts and so on. To improve the technical characteristics of the car by using a body kit, it is possible to use the oncoming air currents to more effectively cool the disc brakes. This will improve their work for the better.


Before carrying out such a work you will needmark the place of the cut-outs, after attaching the future air ducts to them. You can use those that are used in construction. In addition, it is necessary to make special cutouts in the bumper, which will contribute to better cooling of the radiator or air entering the inlet system. Such holes are usually covered with a grid. And it is attached to the bumper on the inside or just pasted into it.

The process of manufacturing a new shape of the body elementsoccurs with the use of fiberglass, plastic or thin sheets of metal (better stainless steel). If you have a modest budget for the manufacture of a body kit, then you need to use a variety of epoxy resins. Slightly more expensive will fit a plastic outfit. The most expensive option is a metal body kit. But it will achieve the highest strength of the structure.