/ / Black Hole Hyper spinning: description, reviews

Spinning Black Hole Hyper: description, reviews

Spinning Black Hole Hyper III recentlyis in great demand. The form is made on a fibrous basis. For catching pike perch, the model fits perfectly. The spinning coil is installed with a wide rack. Directly the balance bar is made entirely of plastic. The parameter of the spinning test of this series is exactly 2 ounces. To learn more about this product, you need to consider its pros and cons.

reel black hole

Advantages

The benefits of the Black Hole Hyper modelcarry a rigid case. The spinning blank can withstand the weight of a large fish. The curve of the whip in the model is insignificant. If you trust the reviews of anglers, then the feeder coils are installed quite simply. The base of the form is very strong. Tooling is allowed to be used for 100 g. For catching the mammoth and char, the model is suitable not bad. The docking under the blank is made of fiberglass. The electrical conductivity parameter is rather low.

black hole hyper reviews

Disadvantages of spinning

The disadvantages of this spinning a bit. Some anglers say that the model will take a weak stance. Feeder coils start to stop at high loads. For the purpose of catching kaluga model does not fit the best way. The holder for the coil is made of aluminum, and at a load of 2 N it can be deformed. The parameter of rupture in spinning is not very high.

Stand under the form in some cases cancrack. Also, when using this spinning, it is important to monitor the condition of the rings. Another disadvantage is the high cost of the goods, which is 5400 rubles. However, in this case, much depends on the chosen size of the model.

Customer Reviews

Many buyers believe that the spinning "BlackHall "is very suitable for catching sturgeon.The stand of the model is erased very seldom.The coil rotates normally.The fixator is mounted without a clip.If you trust the reviews of anglers, the rings are erased seldom.

However, it is important to note that the legs are not capable ofto withstand heavy loads. The balance of the present spinning is quite strong. The coil holder is fixed normally and does not loose. The stand under the blank is made of Kevlar. Screw holders in the spinning are of medium quality.

black hole hyper 2

Opinions of specialists

Experts, as a rule, speak well ofBlack Hole Hyper spinning. First of all, they note the quality form. It is produced in different lengths. With the aim of catching sturgeon the model fits well. The spinning test is at a high level. The structure of this modification is of the fast type. Thus, the bending of the whip does not occur sharply. The protective layer of the model is made of high quality fiberglass. If you trust the reviews of specialists, then the resistance to the gap is quite high. The upper part of the blank is treated with epoxy resin. The electrical conductivity parameter is at 2 microns. The directly protective ring is of the ultralight type. With vibration damping, model problems do not occur often. The holder under the form is rather short. The retainer has good balancing. The coil itself boasts an excellent clamp. The attachments are made with a small protrusion. The clamping washer of spinning is made of titanium. If you trust the reviews of specialists, then the model is suitable for catching pesky.

The clamping plate is fixed very firmly. Snap-on 130 g can be used without problems. The coil is fixed firmly, and the screw holders are held well. Separate attention in spinning plant quality of rings with legs. The degree of elasticity in them is very high.

black hole hyper iii

Modification of 1.3 meters

Spinning "Black Hall" at 1.3 meters, as a rule,produced with a short rack. For the purpose of catching crucian car, the model fits perfectly. If we talk about the advantages, it is important to mention the high quality of fastening under the coil. The spinning test itself is 2 ounces. The spread in this model is not very large. The lower part of the blank is produced with fiberglass protection.

The stand holder is made of titanium. The ring holders have good conductivity. The tube under the rack is made entirely of Kevlar. The diameter of the rings is 0.4 cm. For the purpose of catching dallelia, spinnings of 1.3 meters suit perfectly. The tear resistance of the blank is quite high. If to speak about minuses, then it is important to mention the low strength of the clamping nut. There is a model of this type in the area of ​​4300 rubles.

feeder coils

Description of the spinning by 1.5 meters

Black Hole Hyper Spinning for 1.5 meters hasgood resistance to bending. If we talk about weaknesses, it is important to mention a bad holder. The form in this case is made of Kevlar. Epoxy resin it is completely processed. The ring holders of the modification have excellent conductivity. The parameter of the ultimate breaking load is rather high. The spinning test at 1.5 meters is only 2.3 ounces. If you trust the reviews of anglers, then for catching the synza model is not bad.

Directly coil Black Hole Hyperit is fixed on a flat plate. The clamping ring is of small diameter. If you trust the reviews of specialists, it wears out very slowly. The balance is in the lower part of the form. The inertial coil of said spinning is capable of boasting a strong holder. The pointed ledge is not very large. The stand under the spool is manufactured by the manufacturer with an impact-resistant gasket. In order to catch the white-eyed, the model does not fit well.

Spinning for 2 meters

Black Hole Hyper Spinning (2 meters) most oftenUsed to catch pike. Tooling in this case, you can apply a different weight. If you trust the reviews of anglers, the holders on the spinning wheels have a good stabilization. Mounting under them is selected with a Kevlar coating. The spinning test for 2 meters fluctuates around 3 ounces. The probability of breakage of forms is not very high.

It is also important to note that the models of this seriesoften used to catch sturgeon. There is a holder at the base of the form. The protective plate of the model is erased extremely slowly. However, drawbacks are also important to consider. First of all, anglers say that for catching dallia the model is not suitable. Tooling per 100 grams is not allowed. Accuracy of casting in the model is not very high.

The upper part of the blank is produced without a sealant. The spigot at the coil is quite small. If you trust the reviews of buyers, then the ring breaks rarely. The bend of the whip at catching is small. The stand of the model is treated with epoxy resin. Thus, damping of vibration is carried out well.

spinning black hall

Description of the model for 2.5 meters

At 2.5 meters the spinning of Black Hole Hyper reviews inmostly receives a positive nature. Fishermen this model is often used for catching crucian carp. Tooling is allowed to be used up to 200 g. The spinning test of this series is at the level of 2 ounces. If you trust the angler's reviews, then the holders are of high quality. Separate attention deserves clamps.

Rings at the base of the blank are able to withstandheavy loads. The reinforced handle is fixed to the stand quite firmly. According to fishermen, the model is great for catching dallia. The upper part of the blank is treated with epoxy resin. The electrical conductivity of this spinning by 2.5 meters is not very high.

black hole hyper

Customer feedback on the model for 3 meters

Spinning Black Hole Hyper with a blank for 3 meters is notis in great demand. The form is standardized with a Kevlar holder. If we talk about the features of the modification, it is important to note the quality inertial coil. The stand under it is made entirely of fiberglass and is not afraid of heavy loads. The electrical conductivity parameter of the spinning of this series is low. The protrusion of the model is used at 2.2 cm.

Spinning test for 3 meters - 3.3 ounces. If you trust the reviews of anglers, the bottom holder is made with a quality ring. The clamp of the modification is available without a lining. The lower part of the blank is rarely taken for bending. For the purpose of catching the synza model is used infrequently. Snap-bolts weighing more than 130 g for spinning fit badly. Accuracy of casting in this case is not very high.

comments